Does Your Garage Door Spring Need To Be Repaired Or Replaced?

Are you experiencing problems with opening and closing your garage door? If so, the spring that is used to control the smooth lifting and lowering of your door could be to blame for your current problems. However, these same symptoms can also be caused by a faulty garage door opener. That is why it is so important to definitively determine the source of your problems so that you can seek out the appropriate repair services. The good news is, there is a very simple test that you can perform in order to get the answers that you need.

Step 1: Release Your Garage Door Opener

All automatic garage door openers come with the ability to manually override the system in the event of an emergency. In order to regain manual control of your garage door, you will simply need to pull the emergency release cord attached to your garage door opener. This cord is typically red in color and often has an emergency handle at the end in order to help with easy identification and control. In most cases, this cord will be located directly below the appliance's motor; however, some models will place this release cord near the top of the garage door when it is in a closed position.

Once you find your emergency release cord, simply pull downward in a firm motion in order to resume manual control of your garage door.

Step 2: Testing The Garage Door

Now that you have eliminated the garage door opener from the equation, you will be able to easily determine whether or not your garage door spring is working properly. In order to do this, begin by positioning yourself on the outside of the door. Try lifting the door a few feet off the ground. If the door is too heavy to open, your garage door spring is likely broken. At this point, you should abandon the test and contact a professional repair contractor to have the spring replaced.

If you are able to lift the door, lift it until it is a few feet off the ground and then release the door. If the door remains in its current position, your spring is working properly and your problems were likely caused by your garage door opener. However, if the door begins to close or simply slams to the ground, your garage door spring will require repair or replacing in order to correct the problem.

Contact a business like America's Garage Doors LLC to take the next step in repairing your garage door, or ask them any further questions you may have about the functionality of your garage door.


Share